Home / Products / CTC006-HJ1460
Collaborative Welding Arm

CTC006-HJ1460

6 kg collaborative welding arm with 1460 mm reach for medium-sized parts and longer seams.

6 kg
Payload (kg)
±0.05 mm
Repeatability
1460.7
Reach / Span
Request a Quote
CTC006-HJ1460

What is the CTC006-HJ1460?

The CTC006-HJ1460 is a 6-axis collaborative welding robot arm with a 6 kg payload and 1460 mm reach. It offers a longer reach than the CTC007-HJ1077 while keeping the same lightweight, bench-mountable form factor.

Key Features

  • Extended Reach in a Compact Base: 1460 mm reach from a 22 kg arm allows coverage of larger parts without a full-size industrial robot footprint
  • Spot Welding Ready: compatible with spot welding guns and controllers for resistance welding applications
  • Quick Tool Change: standard flange interface supports rapid swapping between torch, gripper, or spot gun
  • Low Noise Operation: noise level is ≤60 dB, suitable for cells located near manual assembly areas
CTC006-HJ1460
CTC006-HJ1460

Typical Applications

This system is widely used in the following industries and scenarios:

  • Medium Frame Welding: steel frames and guards between 500 mm and 1400 mm in length
  • Spot Welding: resistance spot welding of automotive-style brackets and panels
  • Fixture-Based Batch Production: repetitive welding on dedicated fixtures where reach is more important than payload

Technical Parameters

Payload6 kg
Reach / Span1460.7 mm
Repeatability±0.05 mm
Weight22 kg
Rated Power260 W
Number of Axes6
Protection DegreeIP65
Noise Level≤60 dB
Max Tool Speed3000 mm/s
Control BusEtherCAT / 1 kHz
Working Temperature-5 ~ 55°C
Humidity5%~90%RH, Non-condensing
Installation ModeArbitrary angle
Tool PortI/OPort — 1 channel 24V/1A; 2 DI; 2 DO; 2 AI
COM Port1 channel 24V/1A; 1 RS485; 1 EtherCAT

Frequently Asked Questions

The CTC006-HJ1460 has a longer reach (1460 mm) and a slightly lower payload (6 kg). The CTC007-HJ1077 has a shorter reach (1077 mm) and higher payload (7 kg).
Yes, with a suitable GMAW (MIG/MAG) power source and aluminum wire feeder setup.
Risk assessment is required. The arm supports collaborative operation with collision detection, but fencing may still be needed depending on application speed and torch orientation.
Repeatability is ±0.05 mm.

Ready to Automate Your Welding Production?

Contact our engineering team for a free consultation and quote.

Request a Quote
Request a Quote