Collaborative Welding Arm
Request a Quote
CTC015-HJ1464L
Laser-ready version of the CTC015-HJ1464 with pre-configured fiber laser welding support.
15 kg
Payload (kg)
±0.03 mm
Repeatability
1464.3
Reach / Span
What is the CTC015-HJ1464L?
The CTC015-HJ1464L is a laser-optimized variant of the 15 kg CTC-HJ collaborative arm. It shares the same 1464 mm reach and mechanical specifications as the CTC015-HJ1464 but is pre-configured for laser welding head integration and fiber cable routing.
Key Features
- Laser Welding Pre-Configured: cable routing and control interfaces are prepared for laser welding heads and process monitoring sensors
- Same Payload as Standard CTC015: 15 kg payload supports laser heads, fume extraction nozzles, and seam tracking in one setup
- Hand-Guide Teaching for Laser Paths: operators can quickly teach precise laser seam paths without writing coordinates
- IP65 Joints: protected against dust and weld spatter in laser cell environments
Typical Applications
This system is widely used in the following industries and scenarios:
- Battery Tray Laser Welding: sealed seams for battery enclosures and trays
- Thin Sheet Metal Joining: low-heat-input welding of stainless steel and aluminum sheet
- Precision Component Welding: medical, electronics, and automotive components requiring narrow heat-affected zones
Technical Parameters
Payload15 kg
Reach / Span1464.3 mm
Repeatability±0.03 mm
Weight36 kg
Rated Power550 W
Number of Axes6
Protection DegreeIP65
Noise Level≤60 dB
Max Tool Speed3000 mm/s
Control BusEtherCAT / 1 kHz
Working Temperature-5 ~ 55°C
Humidity5%~90%RH, Non-condensing
Installation ModeArbitrary angle
Tool PortI/OPort — 1 channel 24V/1A; 2 DI; 2 DO; 2 AI
COM Port1 channel 24V/1A; 1 RS485; 1 EtherCAT
Frequently Asked Questions
The L variant is optimized for laser welding integration, including cable routing and control interfaces for laser heads.
No. The laser source is supplied separately and integrated by the customer or CBOXTEC application team.
Repeatability is ±0.03 mm.
Yes, it can be configured for GMAW when fitted with a MIG/MAG torch.
Ready to Automate Your Welding Production?
Contact our engineering team for a free consultation and quote.
Request a Quote